Wall-Mounted Pull-up Bar Assembly
Wall-Mounted Pull-up Bar Assembly Instructions:
** Pull-up rig assemblies are guaranteed against failure only if properly installed. Two people required for safe assembly.
Distance between brackets: Wood Studs – 32" or 48"
Height to be adjusted based on ceiling height or athlete height
Max weight: 500lbs
- Find middle of stud with stud finder and mark it with pencil. Typically, there are either 32” or 48” between studs
- With a second person, find desired height of bracket and mark with pencil. Use drilled holes to mark screw location. Use level on side of bracket to ensure straightness.
- Pre-drill wood stud with supplied 7/32” HSS drill bit, 2.5” deep minimum
- Install supplied 3.5” lag bolts with flat washer and lock washer