SRC Heavy Duty Dumbbell Rack
** To avoid injury, always have assistance from someone while assembling this product
- Lay the equipment down on a flat surface- if the surface is not flat and level, this product will not be safe to use or assemble. Finger-tighten all bolts only, until step #4.
- With assistance, stand one side up and fix any shelf in place using two sets of the provided ½” hardware. For best result use the bolt and flat washer on the outside of the rack and the lock washer and not on the inside of the rack. Repeat this step with the opposite side.
- Repeat step #2 with the two remaining shelfs. Be sure to only finger tighten all hardware.
- Once all hardware is in place, use a securing tool (ex: wrench) on each side, fully tighten bolts.